Password (Menu => Setup => Password); Date/Time (Menu => Setup => Date/Time) - Honeywell HWC-S363-RV Instruction Manual

Ip speed dome camera
Table of Contents

Advertisement

5.7 Password (MENU => Setup => Password)
You can change the password with 4-digit character in this menu.
The default password is 9999.
Edit Password
1. Select the edit password using the joystick.
2. Select the desired number using the joystick up and down, then twist the joystick
handle.
3. To protect from recording this password number, select the other number using the
joystick up and down by intention.
4. To move the next digit, push the joystick to the right,
5. Repeat step 2-4 up to four digits. At this time, the new digit of the confirmation
displays.
6. Repeat step 2-4 for four digits as the same as the numbers of the step 5.
7. If two passwords match, the edit password completed. If two passwords don't
match, the message of "Password is not changed" displays. At this time, try it again.
5.8 Date/Time (MENU => Setup => Date/Time)
NOTE: When installing a dome for the first time, the clock doesn't operate. When you
change the time and date, the clock starts to operate.
The date and time can be displayed on the monitor when the Date/Time option is set to
ON in the display menu.
Password Setup
Enable Password : OFF
Edit Password
Confirm Password
Save And Exit
DATE/TIME SETUP
Time Format
Time
Date Format
Date
Daylight Saving : OFF
Edit Daylight Saving
Save And Exit
: 12HR
: 00:00:00 AM
: MM/DD/YYYY
: 09/04/2009
39
PTZ SPEED DOME CAMERAS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hwc-s364-rvHwc-s374-rv

Table of Contents