Honeywell HWC-S363-RV Instruction Manual page 24

Follow the steps below to program the Tours:
1. Press MENU => Function => Tour or Shortcut: TOUR menu to display the main
menu on the monitor. No. + SHFT+TOUR will open directly Tour No.
2. Choose an empty location of function by moving the Joystick up or down.
3. Stored Preset view can be recalled by pressing Prst button, the camera will move to
the stored Preset view.
4. To place predefined functions as a Tour, press the function buttons (such as Tour,
Ptrn, or Scan ,Prst ).
Then select function No. by twisting the Zoom handle. (Programmed function No. will
be scrolled).
To remove functions from the Tour, press the HOME or Off button, blank position
mark (- - -) will be displayed. You can overwrite the programmed position.
5. Repeat Step 2 through 4 for each desired position. Each title will be displayed on top
of the line.
6. Up to 8 Presets, Tours, Patterns Scans can be selected for a Tour. You can expand
the Tour sequence by calling other programmed tours. Moving the Joystick handle
to right or left while the cursor is on the top of the line (Tour 01) to select another page
of the Tour menu. (Tour 01)
8. You can enter a title for the selected Tour by twisting the Joystick while the cursor is
on the top of the line (Tour 01). Rotate the handle clockwise or counterclockwise to
Tour 01:xxxxxxxxxxxxxxxx 01/04
Func No S DW Title
Prst 064 S 03 ----------------
Ptrn 004 S 03 ----------------
Scan 016 S 03 ----------------
Tour 004 S 03 ----------------
---- --- - 03 ----------------
---- --- - 03 ----------------
---- --- - 03 ----------------
---- --- - 03 ----------------
Prev
Save And Exit
xxxxx : 16 digits of title for tour label
- - - : blank preset position
Speed : F-Normal/ M- Medium D.Scan/ S- Slowest D.Scan
DWell : 03-99 Sec
PRST : PRESET 1~240
PTRN : PATTERN 1~4
SCAN : SCAN 1~16
TOUR : TOUR 2~8
Next
24
PTZ SPEED DOME CAMERAS