Honeywell HWC-S363-RV Instruction Manual page 20

Follow the steps below to program the Preset positions.
1. Select the camera number by pressing 0 ~9 and CAM.
2. Simply press PRST button to enter preset menu. ( MENU => Function => Preset)
3. Select the empty preset location to be programmed by moving the Joystick
up/down. If selected location is not empty, pressing PRST button will display the
predefined position.
4. After selecting an empty position, press and hold SHFT/PGM then use the Joystick
to control the direction of the camera and lens.(Or twist the zoom handle or press the
zoom button to start PTZ control for view selection.)
5. After aiming the camera (view direction and lens control) to a specific position,
release SHFT/PGM button (or hit the focus button). The selected location No. field will
be filled with "A A F F". Move the joystick to the right to select each
Focus/Iris/BLC/WDR mode using zoom handle.
6. Move to the title field to edit/enter the name. Rotate the handle CW and CCW or
press Tele or Wide button to enter the character table as below.
7. Select the desired character digit on the title line using Joystick Left/Right.
8. Move the cursor to the desired character on the character table using Joystick
Up/Down/Left/Right, then twist the Joystick to CCW/CW(or turn right/left) at the
desired character to complete selection, then the cursor position on the title moves to
the next position automatically.
9. Twist the Joystick to CCW/CW(or turn right/left) at the "DELETE ALL" field to delete
all characters.
F : Focus I : Iris B : BLC W : WDR
X : 16 digit of preset title
- : not defined
█ : Current cursor position
F : A(Auto Tracking)/M(Manual Tracking)
I : A(Auto Iris)/M(Manual Iris)
B : F(BLC Off)/O(BLC On)/A(Auto BLC)/B(BMB)/ W(WDR)
W : O(WDR On)/F(WDR Off)/A(Auto WDR)
Edit Title
PRESET1_________
▲
1234567890(),./<>?-:;*[]{}
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Space
Insert
Delete All
Exit
Save And Exit
▲ : digit position
Backspace
Delete
20
PTZ SPEED DOME CAMERAS