Symmetricom SyncServer S100 User Manual page 52

SyncServer S100
System Tests dialog
Figure 3-31: System Testing options
You can skip the test by clicking Finish, or initiate the test by clicking Test Now.
The default is to test all the services, so NTP and E-Mail, unless you un-check them, will be
tested.
Click Test Now.
Test Results dialog
Figure 3-32: Test Results shown
This screen tells you if the NTP time source for your S100 is functioning properly or if there is
a test problem.
44 S100 User Guide – Rev. D – June 2005