Table of Contents
Advertisement
the hub directly to the network using the third Ethernet cable and perform an on-network
test.
The following instructions assume you are using Windows OS. With your computer turned
on:
1.
Use and configure Hyperterminal, click Start->Programs->Accessories-
>Communications>HyperTerminal.
2.
The "Connection Description" dialog box appears. In the Name field, enter a name.
In this example, it is
3.
Click OK.
4.
In the "Connect to" dialog, select the COM Port number you are connected to. In
this example, COM Port 1 is selected.
5.
Click OK.
In the "COM1 Port Properties" dialog, enter the following Port Settings.
6.
S100 User Guide – Rev. D – June 2005
Figure 3-4: Connecting the S100
.
S100
2
3
5
25
Advertisement
Chapters
Table of Contents
