Installing The Cradle/Charger On The Bracket - Symbol MC9000-K Product Reference Manual

For embedded windows ce.net

Hide thumbs Also See for MC9000-K:

Table of Contents

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide

Installing the Cradle/Charger on the Bracket

Install the cradle or charger onto the bracket, inserting the bracket's slide into the grooves on the

bottom of the cradle/charger and sliding the cradle/charger into the desired position.

1. For one single slot cradle/four slot charger, center it on the bracket.

2. For two single slot cradles/four slot chargers, slide one onto the left-hand slide, and one

onto the right-hand slide

3. For a four slot cradle, slide the cradle on to the slides, across both brackets.

4. Secure each cradle or charger to its slide using the two set screws provided.

5. Position the power supply on the shelf, behind the cradle.

Slide grooves on bottom of

cradle/charger over bracket

Figure 7-46. Attaching Two Shelf Slides

Insert set screws

Figure 7-47. Attaching Two Shelf Slides