Table of Contents
Advertisement
Setup
Table 7-2
lists the requirements for setting up and using the VCD9000.
Feature
Mounting (See
page
7-18)
Power Connection (See
page
For continued protection
agains risk of fire, replace only
with same type and rating of
fuse according to the input
voltage used.
Serial Connection (See
page
Communication
Table 7-2. VCD9000 Setup Requirements
Four 8-32 X 1" long screws with locking washers (provided as part of the
cradle).
Four #8 washers recommended.
A drill with a #6 drill bit (0.204").
7-20)
Power input cable (provided) connects to vehicle power.
UL-listed in-line fuse rated 4A or 5A (both included), must be used if not
connecting to vehicle's fuse panel.
For 12 V operation use UL-listed 5A fuse (included).
For 24 V operation use UL-listed 4A fuse (included).
In-line fuse holder (included), must be used if not connecting to vehicle's
fuse panel.
7-23)
DB9 female serial cable (some external devices require a null modem
cable). The port is a Standard RS-232 for direct connection to a serial
device.
An MC9000 Series mobile computer.
Setup of mobile computer and external device (as determined by the
application used).
Requirements
7-17
Accessories
Advertisement
Table of Contents
