Connecting Base Station To A Host; Ocia And Ocr Terminals - Symbol LS 3070 Product Reference Manual

LS 3070 Product Reference Guide: Interface Guide

Connecting Base Station to a Host

OCIA and OCR Terminals

The OCIA or OCR port must be activated and referenced by the POS system,
or no communications will take place.
POS Terminal
Base Station
Figure 5-1. Connecting Base Station to OCIA/OCR Terminals
These include:
OCR
IBM 3653/3683/3684, Fujitsu 7770/7880/7990/8770/9000.
OCIA
NCR 2151/2152/2154/2155/2157/2126/2126-1120/2950/7050/7052,
Nixdorf 8812, ICL 9505/9507/9518.
The OCIA port on some terminals, specifically the NCR 2950, 2152 and 2257,
may not be accessible from the exterior of the unit. These terminals must be
opened and the base station cable connected to the OCIA port on the main
processor board.
Note: Some of the above terminals may also be connected as POS keyboard
wedges. See specific installation instructions beginning on page 5-6.
5-2