Integrated Peripherals Option - ECS L7SOM User Manual

speed. If your graphics display card does not support this feature, you need to
disable this item.
AGP Data Transfer Rates (Support 4X)
Determines the data transfer rate of AGP data at either 4X or 2X depending
on your Advanced Graphics Card.
AGP Aperture Size (128MB)
This item defines the size of the aperture if you use an AGP graphics adapter.
It refers to a section of the PCI memory address range used for graphics
memory. We recommend that you leave this item at the default value.
Memory Parity Check (Enabled)
This item enables memory error checking. Enable this item to allow BIOS to
perform a parity check to the POST memory tests. Select Enabled only if the
system DRAM supports parity checking.

Integrated Peripherals Option

This option displays a list of items that defines the operation of peripheral
components on the system's input/output ports.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
SIS OnChip IDE Device
SIS OnChip PCI Device
Onboard SuperI/O Device
USB Controller
USB Keyboard Support
Onboard PCI LAN
Onboard LAN Boot ROM
IDE HDD Block Mode
Init Display First
AGP Auto Calibration
IDE ACCESS INTERFACE
USB1 ACCESS INTERFACE
USB0 ACCESS INTERFACE
Audio ACCESS INTERFACE
- ¯ ® ¬
: Move Enter : Select
F5:Previous Values
Integrated Peripherals
[Press Enter]
[Press Enter]
Menu Level
[Press Enter]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[PCI Slot]
[Enabled]
[Embedded]
[Embedded BUS]
[Embedded BUS]
[Embedded BUS]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
35
Item Help
F1:General Help