Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system.
The clock speed and system bus are determined by the kind of processor you
have installed in your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Host/SDRAM/PCI Clock
- ¯ ® ¬
: Move
Enter : Select
F5:Previous Values
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and
PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic Interference) generated by the system.
CPU Host/SDRAM/PCI Clock(Default)
Use the CPU Host Clock to set the frontside bus frequency for the installed
processor (usually 133 MHz, 100 MHz or 66 MHz).
Frequency/Voltage Control
[Enabled ]
[Enabled]
[Default]
+/-/PU/PD:Value:
F10: Save
ESC: Exit
F6:Fail-Safe Defaults
F7:Optimized Defaults
45
Item Help
Menu Level
F1:General Help