MULTIQUIP Whiteman Series Operation Manual page 26

Plaster and mortar mixers (honda gx160/gx240 series gasoline engines and 1.5 hp electric motor)
Hide thumbs Also See for Whiteman Series:
Table of Contents

Advertisement

TIRES
Check for worn or defective tires (Figure 15). Replace any
defective or worn tires immediately.
CUT
DEFORMED
Figure 15. Tire Wear
PADDLE BLADE CHECK
Check for worn or defective paddle blades (Figure 16).
Make sure that all blades are adjusted properly. Refer to
the Paddle Blade Adjustment procedure in this manual
(Figure 18). Replace all defective or damaged blades
immediately.
WORN RUBBER
CRACKS
Figure 16. Worn Paddle Blade
PAGE 26 — WM70 SERIES PLASTER/MORTAR MIXERS • OPERATION MANUAL — REV. #9 (11/04/19)
BALDNESS
MISSING
RUBBER
CRACKS
MISSING
RUBBER
EMERGENCY STOP SWITCH
(GASOLINE ENGINE MODELS ONLY)
The engine emergency stop switch (Figure 17)
should be tested every time the engine is started. See
Starting the Mixer (Gasoline Engine) in the Operation
section for more information.
EMERGENCY
STOP SWITCH
Figure 17. Emergency Stop Switch
CAUTION
NEVER disable or disconnect the emergency stop
switch. It is provided for operator safety. Injury may result
if it is disabled, disconnected or improperly maintained.
INSPECTION
P U
T O
S H
S T
O P

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents