Power and grounding
As part of the installation planning, ensure that the site meets the power and grounding
requirements of AG2330.
Internal power supply specifications
The following table describes the chassis power supply specifications.
Table 13: Power supply specifications
Internal power supply
50 W AC
Grounding
The AG2330 ships with a grounding lug. You must connect your ground wire to the lug, and
attach the lug to the chassis in the right-hand side of the front panel (as shown in the following
figure). For more information about grounding the chassis, see
the AG2330
convenient site grounding point for your installation. Use a maximum of 8 AWG grounding
cable for the AG2330.
44
Installation — Chassis
90–269 V AC
on page 38. You must attach the other end of the ground wire to the most
Comments? infodev@avaya.com
Input
+12 V DC
Output to AG2330
components
Installing the terminal lug on
August 2013