Figure 3: AG2330 air flow
Important information
You can mount multiple AG2330 units in the same rack without an air gap between the units,
and you can intermingle them with other Avaya products or other vendor equipment.
Caution:
Cable bundles must not block the intake or exhaust vents of the AG2330.
Warning:
Do not install the AG2330 near a standing or running water source or in a high-humidity
environment. For more information, see
Other vendor equipment installed in the same rack can have a vertical space requirement for
heat dissipation and, if so, you must add those space requirements to the space requirements
for the AG2330.
For problem-free operation, locate the equipment rack in an area with sufficient clearance for
cabling and adequate ventilation.
Installation — Chassis
Environmental requirements
Important information
on page 42.
August 2013
27