Personal Safety And Equipment Protection; Module Protection - Avaya AG2330 Installation Instruction

Caution:
If you do not install interface modules in slots, keep the metal cover plates in place over the
slots. Removing the cover plates impedes airflow and proper cooling of the unit. For
translations of this message, see

Personal safety and equipment protection

Read this section to prevent injury and equipment damage.

Module protection

The following practices prevent equipment damage when you work on the Avaya Advanced
Gateway 2330:
• Always wear a grounded antistatic wrist strap when you handle modules.
• Always set modules on appropriate antistatic material.
• Handle modules by the faceplate and handles. Do not touch pins or electrical
connections.
• Do not leave interface module slots empty. You must fill all slots with modules or slot
covers to maintain safety compliance, proper cooling, and electromagnetic interference
(EMI) containment in the shelf.
• Ensure that your environment meets the requirements for temperature, humidity, and
cleanliness. See
• Do not overtighten thumb screws or lug nuts. Tighten screws and nuts until they are snug,
plus a quarter turn. If you use a power tool to tighten screws, use a low torque setting of
2 to 3 in–lb (0.226 to 0.339 N-m).
Installation — Chassis
Cover plate warning statement
Environmental requirements
Personal safety and equipment protection
on page 48.
on page 42.
August 2013 15