Removing The Top Cover Of The Ag2330 - Avaya AG2330 Installation Instruction

Caution:
As a general safety precaution, ensure you provide DC power through a circuit breaker on
the equipment rack.
For more information, see guidelines presented in Articles 110-16, 110-17, and 110-18 of the
National Electric Code, ANSI/NFPA 70.
Procedure steps
1. Insert available ground wire in the ground lug (provided).
2. Crimp the barrel of the terminal lug to secure the ground wire.
3. Secure the ground lug with nut and washer, as shown in the following figure.

Removing the top cover of the AG2330

Open the top cover to replace the DDR-2 SO DIMM, PVIM, or Compact Flash. Do not hot swap
an internal component.
The average time required to open the top cover of the AG2330 is 2 minutes.
Installation — Chassis
Removing the top cover of the AG2330
August 2013 39