Mounting Rack Requirements - Avaya AG2330 Installation Instruction

Vibration
Acoustic noise

Mounting rack requirements

The AG2330 requires a mounting rack or frame with certain mechanical specifications. The
following table provides the mounting rack mechanical specifications.
Table 12: Mounting rack specifications
Specific requirements
Mounting apparatus
Pitch between mounting holes
Horizontal distance between mounting
holes
Mounting bolts
Footprint
Anchoring
Capacity
Cable or conduit
Seismic
Installation — Chassis
Parameter Range
Packaging and shipping—ISTA 2A Office
Vibration—GR-63-CORE Issue 3, Section
4.4.2 and 5.4.2
GR-63-CORE Issue 3, section 4.6 and 5.6
19-inch rack
EIA RS310D standard
15.875 mm, 15.875 mm, 12.7 mm (5/8 in., 5/8
in., 0.5 in.)
465.1 mm (18.312 in)
HEX WSHR HD (SLTD) TYPE TT
0.216-2412-24 class UNC-2B, 0.75 in long
(Avaya P/N p097f815, screw referenced in the
mounting flange kit)
600 mm x 600 mm (23.6 in x 23.6 in)
You must properly anchor the frame or rack to
the floor as cited in the frame- or rack-specific
instructions.
A rack or frame must support the weight of a
fully loaded shelf (or multiple shelves) plus the
associated cable weight.
In countries where codes require it, the frame
or rack must have cable conduit attachment
capabilities for power feeds.
The rack or frame must comply with the zone-
specific requirements of the installation site.
For example, for Zone 4, the PTE2000 frame
with proper anchoring is required.
Mounting rack requirements
August 2013 43