bundles clear of the intake and exhaust vents. Airflow for the unit is shown in the following
figure.
Figure 6: Air flow through the chassis
Environmental requirements
The AG2330 must operate within the specified tolerance limits shown in the following table.
Important:
Install the AG2330 in a restricted-access location. You must limit access to the AG2330 to
authorized service personnel only. Ensure that you allow two to three feet of additional
clearance around the AG2330 for access to the cable connectors on the front and front
panels.
Table 11: Environmental requirements
Operating temperature
Short-term temperature
Operating altitude
Storage altitude
Operating humidity
Storage humidity
42
Installation — Chassis
Parameter
Comments? infodev@avaya.com
Range
0 to 40 C
– 40 C to 70 C
0–11 800 ft (0–3 600 m)
0–35 000 ft (0–11 000 m)
0 to 95% R.H. (noncondensing)
0 to 95% R.H. (noncondensing)
August 2013