Important Safety Instructions - Jenn-Air JIM1550ARB Service Manual

Hide thumbs Also See for JIM1550ARB:
Table of Contents

Advertisement

Important Safety Instructions

WARNING
• When using your appliance, always follow basic
precautions.
• Use the ice maker only for its intended purpose.
• To prevent possibility of hazard due to electrical
shock, never plug the ice maker into a receptacle
which has not been grounded adequately and in
accordance with the local and national electrical
codes. See
warning and the grounding
instructions that follow.
• Disconnect power to the ice maker before cleaning,
servicing or replacing a light bulb.
• In case of power failure, minimize door openings.
• Any electrical service cord that becomes frayed or
damaged should be immediately repaired or
replaced. Never unplug your appliance by pulling on
the power cord.
• Your ice maker should not be operated in the
presence of gasoline or other flammable vapors and
liquids.
• Children should not climb, hang or stand on or in
this refrigeration product.
• Read and follow manufacturer's warnings on ice
machine cleaner products. Personal injury can result
when used improperly.
DANGER
Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigeration
products are still dangerous...even if they will sit for
"just a few days. " If you are getting rid of your old
refrigeration products, please follow the instructions
below to help prevent
accidents.
• Take off the doors.
• Leave the shelves in place
so that children may not
easily climb inside.
Save These Instructions for Future Reference
WARNING
• This appliance is designed to operate on a normal
115 volt, 15 amp, 60 cycle line. There should be a
separate, grounded circuit serving this appliance
only. Do not use an extension cord. Do not use
any device that will alter the electrical
performance of this appliance.
This appliance is equipped with a three-pronged
grounding plug for your protection against possible
electrical shock hazards. It must be plugged into a
grounding receptacle. Where a standard two-prong
wall receptacle is encountered, it is the personal
responsibility and obligation of the customer to have it
replaced with a properly grounded three-prong wall
receptacle. Do not under any circumstances, cut or
remove the third (ground) prong from the power cord.
Do not use an adapter plug.
Power Supply Cord With
3-prong Grounding Plug
Grounding Type
Wall Receptacle
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jim1550arsJim1550arwJim1550acx

Table of Contents