Acura 2011 RDX Owner's Manual page 71

U.S. Canada
Parking Brake and Brake System
Indicator (Red)
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on the
multi-information display (see page
79).
2. If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem in the brake
system. You will also see a
''BRAKE FLUID LOW'' or
''CHECK BRAKE SYSTEM''
message on the multi-information
display. For more information, see
page 467.
2011 RDX
Instrument Panel Indicators
U.S. Canada
Brake System Indicator (Amber)
The brake system indicator (amber)
normally comes on when you turn
the ignition switch to the ON (II)
position and goes off after the engine
starts. If it comes on at any other
time, there is a problem in the brake
system including the electric vacuum
pump. If this happens, have your
vehicle checked by your dealer. For
more information, see page 468.
You will also see a ''CHECK BRAKE
SYSTEM'' message on the multi-
information display (see page 79).
CONTINUED
67