Acura 2011 RDX Owner's Manual page 287

Once a device is linked, the name of
the device will appear on the screen.
Pressing the DISP/MODE button
switches the audio control display
between the Bluetooth Audio and
®
the device name.
If more than one phone is paired to
the HFL system, there will be a delay
before the system begins to play.
To play the audio files, you may need
to operate your phone. If so, follow
the phone maker's operating
instructions.
ꭧ: If an iPod, USB flash memory
device or audio unit connected
to the auxiliary input jack was
selected at the last mode, you
will see iPod, USB or AUX in
the upper display and the audio
control display (if selected).
Push the DISC/AUX button
again to play audio files from
your Bluetooth Audio phone.
®
Bluetooth
Audio System (Models with navigation system)
®
In the following conditions, the
display shows ''NO CONNECT''
message.
The phone is not linked to HFL.
●
The phone is not turned on.
●
The phone is not in the vehicle.
●
Another HFL compatible phone,
●
which is not compatible for
Bluetooth
Audio, is already
®
connected.
2011 RDX
If your Bluetooth
Audio compatible
®
phone does not operate as described,
make sure it is an Acura approved
phone.
To find out if your phone is approved,
go to
www.acura.com/handsfreelink
(in Canada, www.acura.ca),
or call the HandsFreeLink
consumer support at (888) 528-7876.
Voice Control System
You can select the AUX mode by
using the navigation system voice
control buttons, but cannot operate
the play mode functions.
®
CONTINUED
283