Acura 2011 RDX Owner's Manual page 235

To Select a Channel
When in the satellite radio mode, you
can use any of four methods to find
channels: TUNE, SEEK/SKIP
(CATEGORY), SCAN, and the preset
icons.
You can also switch between the
category mode and channel mode on
the audio control display. Press the
AUDIO button to view the display,
then push down the selector on the
interface dial. Rotate the interface
dial to select the mode. Press
ENTER on the selector to enter your
selection.
TUNE － Press the TUNE/FOLDER
bar to change channel selections.
Press the side of the bar to tune
to higher numbered channels, and
the side of the bar to tune to
lower numbered channels. In the
category mode, you can only select
channels within that category.
Playing the XM
®
TUNE ICON
You can also change channel
selections on the audio control
display. Press the AUDIO button to
view the display, then push down the
selector on the interface dial. Rotate
the interface dial to select TUNE.
Press ENTER on the selector to
enter your selection. Rotate the
interface knob to the desired
channel. In the category mode, you
can only select channels within that
category.
2011 RDX
Radio (Models with navigation system)
SEEK/SKIP (CATEGORY) ICON
SEEK/SKIP (CATEGORY) －
Press either side of the SEEK/SKIP
(CATEGORY) bar (
select another category.
You can also change the category on
the audio control display. Press the
AUDIO button to view the display,
then push the selector on the
interface dial to the right side or left
side to select another category.
or ) to
CONTINUED
231