Acura 2011 RDX Owner's Manual page 223

To Play the Radio
The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position. Press the AUDIO button to
view the audio control display. Turn
the system on by pressing the PWR/
VOL knob or the AM/FM button.
Adjust the volume by turning the
PWR/VOL knob.
Playing the FM/AM Radio (Models with navigation system)
The band and frequency the radio
was last tuned to are shown on the
upper display. To change bands,
press the AM/FM button. You can
also change bands with the interface
dial. Press the AUDIO button to view
the audio control display and the
band changes to FM1, FM2, or AM
each time you push the selector up.
On the FM bands, ''STEREO'' will be
shown on the audio control display.
''ST'' will also appear on the upper
display if the station is broadcasting
in stereo. Stereo reproduction on AM
is not available.
XM Radio information is available on
page 228.
2011 RDX
To Select a Station
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, the
preset buttons or icons, and AUTO
SELECT.
TUNE － Use the TUNE/FOLDER
bar to tune the radio to a desired
frequency. Press the
bar to tune to a higher frequency,
and the side of the bar to tune to
a lower frequency.
If you press and hold the
side of the bar, the frequency will
begin to change rapidly. It will stop
when you release it.
side of the
or
CONTINUED
219