Acura 2011 RDX Owner's Manual page 225

To activate the scan function with the
interface dial, press the AUDIO
button to view the audio control
display, then push down the selector
on the interface dial, and push the
selector to the right. You will see
''SCAN'' on the audio control display.
When it finds a strong signal, it will
stop and play that station for about 10
seconds. If you do nothing, the
system will then scan for the next
strong station and play it for 10
seconds. When it plays a station that
you want to listen to, press the SCAN
button again, or push the interface
selector to the right again.
Playing the FM/AM Radio (Models with navigation system)
PRESET ICONS
Preset － Each preset button/icon
can store one frequency on AM and
two frequencies on FM. To view the
preset icons on the audio control
display, push the AUDIO button.
2011 RDX
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two sets of FM frequencies with
the preset buttons (on-screen
icons).
2. Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
3. Pick a preset number (1－6), you
want for that station. Press the
preset button, and hold it until you
hear a beep.
CONTINUED
221