DataCard SD Series Packaging Manual page 2

4.
Remove the printer supplies.
a.
b.
c.
d.
5.
Remove the printer from the laminator (SD460 units only).
a.
b.
c.
d.
2
Push down and open the printer swing arm.
Remove the supply cartridge from the printer.
Unload the print ribbon from the supply cartridge.
Replace the supply cartridge in the printer and close the swing arm.
Open the laminator access door and slide the printer locking lever in the
laminator to the left position (unlocked).
Disconnect the data cable from the laminator to the printer.
Lift the printer off of the laminator and place the printer in a stable position.
Close the laminator.
Lock
Unlock
SD Series Printer Repackaging for Shipment