Honeywell Touchpoint Plus Technical Handbook page 74

5) Touch the [Channel] you want to change and then touch [Select].
6) Touch the buttons and boxes to make changes as required:
7) Touch [Next].
Set special state output levels:
8) Touch [Next].
Select input channel to map the mA output
9) Touch [Finish].
10) If happy with the settings, touch [Apply]. Wait for the changes to be made.
11) Repeat all to Commission or edit further mA output channels.
MAN0984_Iss 4_01/19
Pt. No. 3011M5001 74
Touchpoint Plus
Technical Handbook