Honeywell Touchpoint Plus Technical Handbook page 66

6) Touch any settings you want to change, then scroll through and touch your choices, and touch [Select] to close
the window:
Refer to Ch.16 Compatible Sensors for a list of
available detectors.
You can also use the TPPL Sensor Catalog to select
your gas is not listed.
Refer to Ch. 9.4 How to Update the Sensor Catalogue
for further information.
7) Then touch [Next] to see these settings inserted ( use [Prev] if you want to amend them):
MAN0984_Iss 4_01/19
Pt. No. 3011M5001 66
Commissioning
Touchpoint Plus
Technical Handbook