Honeywell Touchpoint Plus Technical Handbook page 70

6) Touch the required settings, change details and touch [Select]:
Refer to Ch.16 Compatible Sensors for a list of
available detectors.
You can also use the TPPL Sensor Catalog to select
your gas is not listed.
Refer to Ch. 9.4 How to Update the Sensor Catalogue
for further information.
Note: The Target Gas Type is automatically entered by your choice of Sensor Type.
Note: The Sensor Type gases will vary with different types of Detectors
with EN 60079-20-1 LEL levels.
Note: Sensors must be recalibrated when selecting a new target gas.
Note: Refer to sensor user manual for selection of gas group
Note: Refer to Ch.6.14.4 of mA input channel setting for the additional mV input setting. Note that STEL and TWA are
not available for mV input channels.
MAN0984_Iss 4_01/19
Pt. No. 3011M5001 70
Commissioning
-
Touchpoint Plus
Technical Handbook