Honeywell Touchpoint Plus Technical Handbook page 145

Parameter Name
Maintainer
Password for Access Level Maintainer
Password
Admin Password Password for Access Level Admin
Web Operator
Password for Access Level Web Operator
password
Service Contact Service contact
System Label System label
Home Screen Home Screen types
Enable Remote
Enable/disable Remote inhibit
Inhibit
Remote Inhibit State Get Remote inhibit state
Menu Timeout Set Menu time out
Auto Logout
Set auto logout time for menu
Timeout
Set an alarm event to Dedicated Alarm
Dedicated Alarm1
output #1
Set an alarm event to Dedicated Alarm
Dedicated Alarm2
output #2
Enable Remote
Remote reset enable/disable
reset/ack
Gas log Interval Gas log interval
Gas log Threshold Gas log Threshold
Buzzer Enable Buzzer enable/disable
MAN0984_Iss 4_01/19
Pt. No. 3011M5001
Parameter
Description
Configurable Parameter Reference Guide
Applies Read/
Range
to Write
System R/W 35 chars
System R/W 35 chars
System R/W 35 chars
System R/W 120 chars
System R/W 50 chars
System R/W list, tile, sum
System R/W Enable/Disable
System R/W Open/Close
System R/W 5~100
System R/W 15~100
Alarm1/Alarm2
System R/W
/Alarm3
Alarm1/Alarm2
System R/W
/Alarm3
System R/W Enable/Disable
System R/W 0~600
System R/W 0.1~2.0
System R/W Enable/Disable
145
Default Value Remark
TPPL
TPPL
TPPL
tpp@honeywell.c
om
TPPL
List(0)
Disable(0)
Normal Open(0), Normal
Open(0)
Close(1)
90 seconds
15 minutes
0 (Alarm1)
1 (Alarm2)
Disable
15 0: Disable, second
%FS
0 0 means that gas log will be
stored every log interval.
Disable
Technical Handbook
Touchpoint Plus