Table of Contents
Advertisement
4.2 Inclusion of Z-Wave Device
The Devices tab enables you to manage devices included in the Home Automation System.
Devices are plane system compatible sensors, IP cameras and door phone devices.
To add a Z-Wave device, click Add. Once the system sets itself into learning mode, perform
the tasks described in the manuals (see Appendix A and B).
You can control your devices by classification, based on the HZS-100
Wall-mount Motion Sensor
Parameters
to
explain the application.
Description
This parameter can be configured with the value of 1 through
255. Where 1 means it will not be triggered within 1 minute
again. Default is for 3 minutes.
Temperature Unit has Celsius and Fahrenheit.
20
-
-
Z-Wave Home Automation Control Gateway
HAC-1000
Advertisement
Table of Contents
