Dhcp Client; Pppoe - Planet Networking & Communication HAC-1000 User Manual

We suggest to use Static IP for HAC-1000 due to control pad need to set the IP of
HAC-1000. If IP of HAC-1000 be changed, control pad can not connect with
HAC-1000.

3.4.2 DHCP Client

If you choose this connection type, please make sure your IP won't be changed.
When a DHCP server is installed on the
network to issue IP address assignment.
With this setting, the IP address is
assigned automatically.

3.4.3 PPPoE

PPPoE stands for Point to Point Protocol over Ethernet
A standard that builds on Ethernet and Point-to-Point network protocol, it allows Internet
Camera to connect to Internet with xDSL or cable connection. It can dial up your ISP and get a
dynamic IP address. For more PPPoE and Internet configuration, please consult your ISP.
It can directly connect to the xDSL; however, it should be set up in a LAN environment to
program the PPPoE information first, and then connect to the xDSL modem. Power it on again
to enable the device to dial on to the ISP for connecting to the WAN through the xDSL modem.
Enter the Username for the connection.
Enter the Password for the connection.
Z-Wave Home Automation Control Gateway
18
- -
HAC-1000