Planet Networking & Communication WDAP-802AC User Manual page 75

Step 5. Click "Apply" to finish the setting.
Step 6. Click "Return home" to check WDS status.
Step 10. Use command line tool to ping each other to ensure the link is successfully established.
From Site-1, ping 192.168.1.200, and in Site-2, ping 192.168.1.100.
The following hints should be noted:
1) The encryption method must be the same as that of both sites if configured.
2) Both sites should be Line-of-Sight.
3) For the short distance connection less than 1km, please reduce the "RF Output Power" of
both sites.
4) For the long distance connection over 1km, please adjust the "Distance" to the actual distance
or double the actual distance.
User Manual of WDAP-802AC
-67-