Planet Networking & Communication WDAP-802AC User Manual page 32

The page includes the following fields:
Object
Wireless Repeater
Repeater SSID
Lockmac
Bandwidth
Authentication
WDS Passthrough
Press Scan AP to show the root AP that you need to repeat and press Choice to select the AP.
Select "2.4G" or "5.8G" wireless LAN.
Enter the root AP's SSID or press "Scan AP" to select.
Check to lock the root AP MAC address.
Select the operating channel width, "20MHz" or "40MHz".
Select the wireless encryption of root AP.
enable
Check to WDS passthrough if the
The default setting is "enable"
Figure 5-9 Repeater Mode -- Scan AP
User Manual of WDAP-802AC
Description
root AP
is the
-24-
same model as client.