Planet Networking & Communication WDAP-802AC User Manual page 39

AP1 enters the MAC address of AP2. And AP2 enters the MAC address of AP1. Then select the same Channel
to establish the connection.
The page includes the following fields:
Object Description
SSID
It is the wireless network name. The default SSID is "PLANET_5G".
Bandwidth Select the operating channel width, "20MHz" or "40MHz".
Channel
Select the operating channel you would like to use. The channel range will be changed by
selecting a different domain.
MAC
Enter the MAC address of slave AP.
Encryption
Select the wireless encryption. The default is "Open".
Figure 5-177 Super WDS Mode – AP1
Figure 5-188 Super WDS Mode – AP2
-31-
User Manual of WDAP-802AC