F Igure 5-11 R Epeater M Ode – C Onfigure 5G W Ireless - Planet Networking & Communication WDAP-802AC User Manual

Select the authentication and bandwidth which are the same as root AP to establish the connection.
Configure wireless settings for 5G signal
The page includes the following fields:
Object
WLAN Status
Wireless Analyzer
SSID
Channel
Encryption
Figure 5-10 Repeater Mode -- Select AP
Figure 5-11 Repeater Mode – Configure 5G Wireless
Description
Select ON or OFF to enable or disable wireless LAN.
Press the button to check your wireless environment.
It is the wireless network name. The default SSID is PLANET_5G.
Select the operating channel you would like to use. The channel
range will be changed by selecting a different domain.
Select the wireless encryption. The default is None.
User Manual of WDAP-802AC
-25-