Chapter 3.Connecting To The Ap; System Requirements; Installing The Ap - Planet Networking & Communication WDAP-802AC User Manual

3.1

System Requirements

Broadband Internet Access Service (Cable/xDSL/Ethernet connection)

One IEEE 802.3at PoE switch (supply power to the WDAP-802AC)

PCs with a working Ethernet adapter and an Ethernet cable with RJ45 connectors

PCs running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC OS 9 or later, Linux,

UNIX or other platforms compatible with TCP/IP protocols
1. The AP in the following instructions refers to PLANET WDAP-802AC.
2. It is recommended to use Internet Explorer 11, Firefox or Chrome to access the AP.
3.2

Installing the AP

Before installing the AP, make sure your PoE switch is connected to the Internet through the broadband service
successfully at this moment. If there is any problem, please contact your local ISP. After that, please install the
AP according to the following steps. Don't forget to pull out the power plug and keep your hands dry.
Chapter 3. Connecting to the AP
-11-
User Manual of WDAP-802AC