Planet Networking & Communication WDAP-802AC User Manual page 70

User Manual of WDAP-802AC
Step 4. In AP-2, press Scan AP to search the AP-1. You can also enter the MAC address, SSID, encryption and
bandwidth if you know what they are.
Note. WDS passthrough should be disable if the root AP is the different model from client AP.
Step 5. Click "Next" to finish the setting.
Step 6. Click "Device Status" to check connection status.
Step 7. Use command line tool to ping each other to ensure the link is successfully established.
From Site-1, ping 192.168.1.200, and in Site-2, ping 192.168.1.100.
-62-