About Event Id - Epson EH-LS500W User Manual

Table of Contents

Advertisement

Troubleshooting

About Event ID

Check the event ID and perform the remedy given below. If you cannot resolve the problem, contact your
local dealer or the nearest Epson repair center.
Epson Projector Contact List
s
Event ID
0022
Network communication is unstable.
0027
0028
0029
0030
0031
0035
0434
0481
0482
0485
0432
Failed to start the network software.
0435
0433
An image that was transferred cannot be re-
produced.
0484
Communications was cut off from the comput-
er.
04FE
The network software ended unexpectedly.
0479
A system error occurred in the projector.
04FF
0891
The same SSID access point cannot be found.
0892
WPA and WPA2 authentication type mismatch. Check the setting of wireless LAN security to
0894
Communications was cut off because a con-
nection was made to the wrong access point.
0898
Failed to acquire the DHCP.
0020
Other connection errors
0026
0032
0036
0037
0038
0899
Cause
82
Remedy
Check the network communication status, and
reconnect after waiting for a while.
Restart the projector.
Restart the network software.
Check the status of network communications.
Wait for a while and then try connecting again.
Restart the projector.
Set the computer, the access point, and the
projector to the same SSID.
see if it is correct.
Check with the network administrator and fol-
low their instructions.
Check that the DHCP server is operating cor-
rectly. Turn off the DHCP setting if you are not
using DHCP.
Network - Network Configu-
s
ration - Wireless LAN - IP Settings -
DHCP
p.67
If restarting the projector or network software
does not solve the problem, contact your local
dealer or the nearest address provided in the
Epson Projector Contact List.
Contact List
Epson Projector
s

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eh-ls500b

Table of Contents