Epson EH-LS500W User Manual page 65

Configuration Menu
Function
Operation Direct Power
On
Sleep Mode
Sleep Mode
Timer
Illumination
High Altitude
Mode
Quick Startup Off, 20min., 60min.,
USB Power in
Standby (on-
ly some coun-
tries and re-
gions)
Log Save Des-
tination
Standby Mode Communication Off, Communication On
Language -
Reset Yes, No
Menu/Settings
On, Off
On, Off
1 to 30 mins.
On, Off
On, Off
90min.
On, Off
Internal Memory, USB and
Internal Memory
64
Explanation
You can set up the projector so that projection
starts as soon as the power cord is plugged in
without any button operations.
Note that when this is set to On, projection starts
if power is restored after a blackout or other
power outage and the power cord is still plugged
into the projector.
If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When in standby mode,
press the power button on the remote control or
the standby button on the control panel to re-
start projection.
Sets the interval for Sleep Mode.
Set this to Off if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
Set this to On if you are using the projector above
an altitude of 1500 meters.
Set how long you want to Quick Startup mode to
be available. Turn off the projector to enter Quick
Startup mode. In Quick Startup mode, you can
project within seconds of pressing the power
button.
In Quick Startup mode, the standby power con-
sumption increases.
When set to On, power is also supplied to the
streaming media player from the USB power ca-
ble when the projector is in standby mode (pow-
er off). If the internal temperature of the projector
gets too hot, power may stop automatically.
Set where you want to save the logs.
Communication On indicates that the projector
can be monitored over a network when the pro-
jector is in standby mode.
Selects the display language.
Resets all Extended settings except for Memo-
ry, Projection, High Altitude Mode, Standby
Mode, USB Power in Standby and Language.