Base - Epson EH-LS500W User Manual

Introduction

Base

Name
a Front adjustable foot
b Air intake vent
c Air intake vent
d Air exhaust vent
e Rear foot
Caution
Place the projector on a flat surface such as a table to project images. Do not attach a commercially available
mount and so on to the screw hole at the bottom. If this projector is installed on a wall or ceiling using this
screw hole, it could fall and cause damage or injury to occur.
When the projector is set up on a table, extend the foot to correct vertical distortion
in the image. p.27
s
Takes in air to cool the projector internally.
Takes in air to cool the streaming media player.
Air exhaust vent to cool the streaming media player.
Supports the projector when it is set up on a table.
10
Function