IBM Aptiva Series Hardware Maintenance page 62
Machine type 2136 and ibm monitors type 2119 and 2120
Hide thumbs
Also See for Aptiva Series:
- Handbook (164 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Table 2- 1
BIOS Error Codes, Messages, and Beeps List
BIOS Error Codes,
Messages, beeps
030
Pointing Device Error
031
Pointing Device
Interface Error
040
Diskette Drive Controller
Error
041
Diskette Drive A Error
043
Diskette Drive B Error
045
CPU Clock Mismatch
047
Diskette Drive(s)
Disabled
Action/FRU
Ensure keyboard and mouse are connected
in their own connectors without mix-up.
Plug mouse connector properly and
reboot system.
Replace PS/2 mouse
System board
Ensure keyboard and mouse are connected
in their connectors without mix-up.
Replace PS/2 mouse
System board
Ensure the diskette drive configuration
setting in BIOS Setup is correct.
Diskette drive cable/connection.
Diskette drive.
System board.
Ensure the diskette drive A configuration
setting in BIOS Setup is correct.
Diskette drive power.
Diskette drive cable/connection.
Diskette drive A
Ensure the diskette drive A configuration
setting in BIOS Setup is correct.
Diskette drive power.
Diskette drive cable/connection.
Diskette drive B
Enter BIOS Setup, then reboot system.
Ensure the CPU frequency jumpers
(JP15,17 and JP8 ) are set correctly. See
"System Board Layout" on page 5-2.
Ensure the diskette drive is not set to
[Disabled] in the Security Options of
BIOS Setup.
Check Procedures
2-9
Advertisement
Table of Contents
