Dive History Memory [2 History] - Suunto VYTEC DS Instruction Manual

Fig. 4.14. Dive History
information. Total number
of dives, dive hours and
maximum depth.
Fig. 4.15. Data Transfer
mode. [3 TR-PC].
Fig. 4.16. Dive Simulation
options. [2 SIMUL].
48
DIVE PROFILE MEMORY [PROF]
The scrolling of the profi le will start automati-
cally when the Logbook page IV (PROF) is
entered.
With the default setting, the dive profi le is re-
corded and displayed in 20-second increments
with each display being shown for about three
seconds. The depths shown are the maximum
values of each interval.
Pressing any button stops the scrolling of the
profi le.
NOTE! Several repetitive dives are consid-
ered to belong to the same repetitive dive se-
ries if the no-fl ying time has not ended. See
"Dive Numbering" in section 3.6.2. for further
information.
4.1.2. Dive History Memory
[2 HISTORY]
The Dive History is a summary of all the dives
recorded by the dive computer. To enter the
Dive History Memory Mode select MODE- 1
MEMORY- 2 HISTORY (Fig. 4.13.).
The following information will be shown on the
display (Fig. 4.14.):
• the maximum depth ever reached
• the total accumulated dive time in
hours
• the total number of dives.
The Dive History Memory can hold a maximum
of 999 dives and 999 diving hours. When these
maximum values are reached, the counters will
start again from zero.
NOTE! The maximum depth can be reset to
0.0 m [0 ft] using the optional PC-Interface unit
and Suunto Dive Manager software.