Aircraft Type - Spektrum ix20 Instruction Manual

AIRCRAFT TYPE

Aircraft Type defines what type of model configuration the iX20 is set up to control. Therefore,
this menu should be the first step after creating a new model. The choices made in this menu
define default channel assignments and enable pre-defined mixes with custom menus designed
specifically for the selected application. This menu appears differently for each of the four model
options chosen from during model creation in Model Utilities.
Choosing from the common configurations in this menu opens access to other menus not shown
otherwise. Flaps, for example, can be assigned to a switch and made to function without using
one of the pre-configured options. However, by assigning the correct wing type in the Aircraft
Type menu, a Flap System menu is enabled in the Model Adjust list. The Flap System menu
gives the pilot the choice of switches and a built-in elevator compensation mix, which makes
fine-tuning an airplane for level flight throughout the flap range much easier. Options that enable
mixes will label the default assigned channels in other menus, such as Servo Setup and Monitor.
In menus options, select an on-screen diagram that matches the control layout on the aircraft.
TOC