Model Select; Model Type - Spektrum DX8 Instruction Manual

12
SPEKTRUM DX8 • RADIO INSTRUCTION MANUAL
The following screen appears. Rotate the roller to highlight the desired model then press to select.
The model name will display on the main screen.

Model Select

< B A C K >
Model 1: Mdl01-Acro
odel 2: Mdl02-Acro
Model
Model Type programs the
selected model memory to
function in Helicopter or
Airplane programming. You
should program
Type first when setting up
a new model. Note: You
can assign each model
memory its own model
type.
To Access the Model
Type Function
Press and hold the roller
while turning on the
transmitter. When
Rotate the roller to highlight Model Type then press to access the function. The following screen
appears:
Model Type ItliZ
Airpla
ne
Rotate the roller to highlight the desired model type (Helicopter or
Airplane)
You can return lo the System Setting screen at anytime by
pressing the Back button on the transmitter once.
To return to the Main screen press the Back button on the
transmitter twice or press and hold the Roller lor more than
three seconds.
3: MdlQ3-Acro
System Setup appears
on the screen, release
the roller. The DX8 is
now in System Setup
Mode. if
Model
The following screen
appears. Rotate the
roller to highlight YES
then press the roller to
accept the model type.
Selecting NO will return
you to the previous
screen.
Helicopter
then press the roller to select.
MODE
L
TYPE