Stick Tension - Spektrum ix20 Instruction Manual

Hide thumbs Also See for ix20:

Table of Contents

Turn the screws clockwise a small amount using a small Phillips screwdriver to tighten the stick

tension and counterclockwise to loosen.

NOTICE: Always perform a stick tension test while turning the screws to ensure stick tension

is not too loose or too tight. Overtightening a screw can damage the spring. Loosening a screw

too far can cause a spring to fall out in the transmitter and possibly damage the circuitry within.

Horizontal spring

Vertical spring

STICK TENSION

Vertical spring

Horizontal spring