Acro (Airplane); Aircraft Type; Recommended Servo Connections - Spektrum dx18qq Instruction Manual

Aircraft Type

NOTICE: Refer to your airplane manual for recommended
control throws.
CAUTION: Always do a Control Test of your model with the transmitter
after programming to make sure your model responds as desired.
Use the Aircraft Type Screen to select wing and tail types to match your airplane
model. Diagrams and setup names show on the transmitter screen to show the
available setups.
Refer to community.spektrumrc.com for more information about new DX18QQ
AirWare software updates to support these options.
Wing
• Normal
• Flaperon*
• Dual Aileron*
• Flaperon*
• 1 Aileron 1 Flap*
• 1 Aileron 2 Flaps*
• 2 Ailerons 1 Flap*
• 2 Ailerons 2 Flaps*
• Elevon A*
• Elevon B*
• 4 Aileron*
• 6 Aileron*
* Selection of multiple ailerons activates the Differential menu option.
** Selection of either of these activates the V-Tail Differential menu option
†
Both Canard Types are available in the Tail Type listing with Elevon A or Elevon B selected.
#
Activates the Gyro menu option in the Function List.
††
Activates Pitch in the Function List. If Pitch Curve is active, only one gyro will be available.
Select wing and tail types before doing any other programming.
Image Selection
Press the NEXT screen from the Aircraft
Type screen to access the Aircraft
Options screen and to select an optional
airplane image to use for the model
selected.

Recommended Servo Connections

Dual Aileron Wing
Type Connection
A
Elevon Wing Type
Connection
E
www.spektrumrc.com

ACRO (Airplane)

Tail
• Normal
• V-Tail A**
• V-Tail B**
• Dual Elevator
• Dual Rudder
• Dual Rudder/
Elevator
†
• Canard + 1 Rud
†
• Canard + 2 Rud
NEXT screen
• Gyro 1
#
• Gyro 2
#
• Pitch Curve
††
V-Tail Type
Connection
B
A AUX1 servo port (left aileron)
B AILE servo port (right aileron)
C ELEV servo port (left V-tail)
D RUDD servo port (right V-tail)
E AILE servo port (left aileron)
F
F ELEV servo port (right aileron)
EN
C D
45