Simatic Rf600 - Siemens SIMATIC RF600 System Manual

Hide thumbs Also See for SIMATIC RF600:
Table of Contents

Advertisement

Dense Reader Mode (DRM)
The readers can also interfere with each other (secondary fields), if the channels (Reader
TX, Transponder TX) overlap. In order to prevent a transponder channel overlapping with a
reader channel, we recommend that the Dense Reader Mode (DRM) is used.
Note
Protective cap
If you only use the internal antenna of the reader, we recommend that you close the
external, unused antenna connector on the reader using the protective cap.
Antenna diagram RF610R (ETSI)
The following radiation diagrams show the directional characteristics of the internal antenna
of the RF610R (ETSI) reader. For the spatial presentation of the directional characteristics,
the horizontal plane (azimuth section) as well as the vertical plane (elevation section) must
be considered. This results in a spatial image of the directional radiation pattern of the
antenna.
Figure 5-1
Reference system

SIMATIC RF600

System Manual, 06/2019, J31069-D0171-U001-A22-7618
Readers
5.2 SIMATIC RF610R
111

Advertisement

Table of Contents
loading

Table of Contents