Antenna Patterns - Siemens SIMATIC RF600 System Manual

Hide thumbs Also See for SIMATIC RF600:
Table of Contents

Advertisement

Antennas
6.6 SIMATIC RF650A
Limitations in Japan
Note
Limitation of the radiated power (ARIB)
RF600 systems that are put into operation in Japan must not exceed the following radiated
power with an RF650A antenna:
• 500 mW EIRP (or 27 dBm EIRP) for operation with RF650R (ARIB STD-T107)
• 4000 mW EIRP (or 36 dBm EIRP) for operation with RF680R/RF685R (ARIB STD-T106)
6.6.6

Antenna patterns

Transponder alignment
The RF650A antenna has a circular antenna. With a circular antenna the alignment of the
antenna axis of symmetry changes between horizontal and vertical each time it transmits.
For this reason the alignment of the transponder polarization axis (horizontal/vertical) is
unimportant. Make sure, however, that the transponder is aligned with the antenna.
Figure 6-41
316
Alignment of the transponder polarization axis with a circular antenna axis of symmetry
System Manual, 06/2019, J31069-D0171-U001-A22-7618
SIMATIC RF600

Advertisement

Table of Contents
loading

Table of Contents