Programming via SIMATIC controller
This section is intended only for S7 users.
You can program and configure the SIMATIC RF185C, RF186C and RF188C
communications modules using Ident instructions via a SIMATIC controller.
To configure Ident systems using STEP 7 Basic / Professional (TIA Portal), you need
appropriate Ident instructions. The Ident library with the Ident profile and the Ident blocks are
integrated in STEP 7 as of version V15.1.
You can find a detailed description of the Ident profile and the Ident blocks in the "Ident
profile and Ident blocks (https://support.industry.siemens.com/cs/ww/en/ps/14970/man)"
function manual.
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
8
87