Appendix 1 Packaging Requirements - Alcatel ONETOUCH POP 3 Series Repair Documentation

L2 Repair Document

APPENDIX 1 Packaging Requirements

1.
Any L3 PCBA which has appearance like below cases is not acceptable.

1) The PCBA which shielding cover is rusty or distortion, copper peel off;

2) Smudge on PCBA, such as soldering flux, rudimental glue, handwriting, burn, scratch and so on;
×
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
×
×
5015D/X/A/E_5016A/J Level 2 Repair Document
TCL
×
Communication Ltd.
Page
38/42