L2 Repair Document
8 PCBA exchange
If Level 2 repair does not solve the failure, it is mandatory to change the PCBA and follow the process as
below.
1)
Collect the PCBA (without accessories, LCD and camera), with mic.
2)
Get a new PCBA from the swap stock. Reuse those accessories to assemble the mobile.
3)
Fill in the record sticker with IMEI number, fault code, short code, Hardware Technical Level and
software version.
4)
Send the NG PCBA with record sticker back to L3 repair center with the recommended packaging
method,
Note: packaging method please refer item "APPENDIX 1 Packaging requirement".
9 Other component exchange
The other components exchange such as
1)
Main Camera
2)
Front Camera
3)
MIC
4)
Receiver
5)
Speaker
6)
Vibrator
7)
Other related mechanical components
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
5015D/X/A/E_5016A/J Level 2 Repair Document
TCL
Communication Ltd.
Page
36/42